Electrolux EFC90244X - Manual (Page 19)

electrolux electrolux electrolux electrolux electrolux installation 19 19 19 19 19
GB
• •• •• Connect a tube (tube and bands for fixing not supplied, to be purchased) for
discharging the fumes to the connection ring placed over the aspiration motor
unit.
The other end of the tube should be connected to a device for expelling fumes
on the outside of the hood in the aspiration version. Fig.6a-b
Fig.6a-b Fig.6a-b Fig.6a-b Fig.6a-b
• •• •• If you want to use the filtering version, fix deflector to flues support bracket and
connect the other end of the tube to the connection ring placed on deflector.
Fig.6c
Fig.6c Fig.6c Fig.6c Fig.6c
Fig. 6a Fig. 6a Fig. 6a Fig. 6a Fig. 6a Fig. 6b Fig. 6b Fig. 6b Fig. 6b Fig. 6b Fig. 6c Fig. 6c Fig. 6c Fig. 6c Fig. 6c
• •• •• Connect the electricity.
• •• •• Apply the flues and fix them above
with 2 screws to flues support
bracket. Fig.7a
Fig.7a Fig.7a Fig.7a Fig.7a
• •• •• Slide the lower section of the flue
down to cover the aspiration set until
inserting it completely into the appo-
site housing over the hood. Fig.7b
Fig.7b Fig.7b Fig.7b Fig.7b
Fig. 7a Fig. 7a Fig. 7a Fig. 7a Fig. 7a Fig. 7b Fig. 7b Fig. 7b Fig. 7b Fig. 7b