Electrolux EWG147540W - Manual (Page 7)

DISPLAY
7.1 7.3 7.5 7.6 7.7 7.8
7.9
7.10 7.11 7.12
7.2 7.4
The display shows the following informa-
tion:
7.1: Temperature value
7.2: Temperature icons , Cold
.
During the washing cycle the display shows
the temperature icon animated to indicate
that the appliance has started the heating
phase of the water in the tub.
7.3: Spin value
7.4: Spin speed icons.
• No spin
• Rinse Hold
• Night Cycle
During the spinning phase the spiral is ani-
mated.
No spin option eliminates all the spin pha-
ses and increases the number of rinses for
some programmes.
Rinse Hold: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the display shows
three blinking 0.00, the icon 7.10 is still vi-
sualized, the light of button 8 is off and the
door is locked to indicate that the water
must be emptied out. To empty out the wa-
ter, please read the paragraph «At the end
of the programme».
Night Cycle: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this
washing cycle is very noiseless and it can
be selectionned at night or in times with a
more economical power rate. On some
programmes the rinses will be performed
with more water. When the programme has
finished, the display shows three blinking
0.00, the icon 7.10 is still visualized, the
light of button 8 is off and the door is
locked to indicate that the water must be
emptied out. To empty out the water,
please read the paragraph «At the end of
the programme».
7.5: Option icons.
• Extra Rinse ,
• Easy Iron
,
• Sensitive (if available).
7.6: Child safety lock
(see «Personali-
sation» paragraph).
7.7: Soil degree icons
• Intensive
• Normal/Daily
• Light/Quick
• Super Quick
7.8:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
• End of programme
When the programme has finished three
flashing zeros is displayed, the icon 7.10
disappears and the door can be opened.
• Incorrect option selection
electrolux 7