Technical data, Installation – Electrolux EWG147540W User Manual
Page 23
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
TECHNICAL DATA
Dimensions
Width / Height / Depth
596 / 820 / 544 mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
220-230 V
2000 W
10 A
50 Hz
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Level of protection against ingress of solid particles and moisture
IPX4
Water supply
1)
Cold water
Maximum Load
Cotton
7 kg
Spin Speed
Maximum
1400 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
INSTALLATION
UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
1. After removing all the packaging, care-
fully lay machine on it’s back to remove
the polystyrene base from the bottom.
2. Remove the power supply cable and
the draining hose from the hose holders
on the rear of the appliance.
electrolux 23