Electrolux EIDW6405HT - Manual (Page 6)

6 Operating Instructions
Auto Wash
When a partial load of lightly soiled dishes is
placed in the unit, a wash cycle similar to a short
wash will automatically be performed. When a full
load of heavily soiled dishes is placed in the unit, a
heavy wash cycle will automatically be performed.
The dishwasher's Smart Sensor technology will
determine the type of cycle required to clean the
dishes and will clean more efficiently every time.
Water usage ranges from approximately 5.5 to 10.7
gallons. Wash time ranges from approximately 99 to
162 mins.
Normal Wash
For regularly soiled dishes and silverware. Water
usage ranges from approximately 4.4 to 9.5
gallons. Wash time ranges from approximately 91 to
144 mins.
Eco Wash
For lightly soiled and pre-rinsed dishes and
silverware. Water usage ranges from approximately
5.6 to 6.8 gallons. Wash time ranges from
approximately 78 to 80 mins.
Stemware
For lightly soiled China and Crystal. Water usage is
approximately 6.8 gallons. Wash time ranges from
approximately 85 to 92 mins.
Heavy Wash
For pots, pans, casseroles and dinnerware with
dried-on or baked-on soils. Water usage is
approximately 9.5 gallons. Wash time ranges from
approximately 130 to 149 mins.
WASH CYCLE SELECTIONS
Cycle times are approximate and vary by options
selected. Hot water is necessary to activate
dishwasher detergent and melt fatty food soils.
An automatic sensor checks the water temperature
for the main wash of each cycle. Run hot water
faucet nearest dishwasher until water is hot.
CYCLE SELECTIONS
The Smart Sensor checks the soil level on your
dishes in the Auto, Normal, Stemware and Eco
cycles. Depending on soil level, the sensor will
determine if additional water fills are needed to
clean the dishes or if water fills can be deleted.
Cycle time and water usage will vary based on the
amount of soil on the dishes. Cycle time will also
vary based on the options selected and the
incoming water temperature.