Feature overview, Oven rack supports & oven vents – Electrolux EW30DS65GS User Manual
Page 10
10
1
2
3
4
5
6
7
Feature Overview
Rack positions
installing oven Rack supports
AlwAys instAll oven rAck
support before turning on
the oven (when the oven is
cool).
To install oven rack support,
insert the supports by pushing them
downward into the two brackets on
each side of the oven interior, as
shown below.
To remove the oven rack support
for a self-clean cycle, pull up the
support to disengage them from the
brackets. If the rack supports are not
removed, the self-clean cycle won’t
start.
oven Vent location
The oven is vented
above each door. When
the oven is on, warm air is released through
the vents. This venting is necessary for
proper air circulation in the oven and good
baking results.
Oven vent
Warm Air
oven Rack Positions
This oven is equipped with ladder rack supports with
7 positions to accommodate precisely every mode of
cooking.
(NON-SLIDING
RACK ONLy)
oVen Rack suPPoRts & oVen Vents