Electrolux EW27EW65GB - Manual (Page 8)

8
1
2
3
4
5
6
7
Feature Overview
OVEN RACK SUPPORTS & OVEN VENTS
Rack positions
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK SUPPORT
BEFORE TURNING ON THE OVEN (WHEN
THE OVEN IS COOL).
To install oven rack support, insert the
supports by pushing them downward into
the two brackets on each side of the oven
interior, as shown below.
To remove the oven rack support for a
self-clean cycle, pull up the support to
disengage them from the brackets. If the
rack supports are not removed, the self-
clean cycle won’t start.
Oven Vents Location
The oven is vented above each door. When
the oven is on, warm air is released through
the vents. This venting is necessary for proper
air circulation in the oven and good baking
results.
Oven Vent
Warm Air
Warm Air
Oven Vent
Oven Rack Positions
This oven is equipped with ladder rack supports
with 7 positions to accomodate precisely every
mode of cooking.
(NON-SLIDING
RACK ONLY)