Capturing video images with videoimpression – AGFA ePhoto CL34 User Manual
Page 48
Chapter 7: Using the ePhoto CL34 for Video Applications
48
Capturing Video Images with VideoImpression
1
Connect the ePhoto CL34 to your computer with the USB cable.
2
Switch on the camera.
3
Choose Start > Programs > ArcSoft Video > ArcSoft VideoImpression to launch
VideoImpression.
4
Click the New button to capture video.
5
Select the Capture Video button (camera icon).
6
Select “ePhoto CL34” in the Driver list (if needed).
7
Click the Format button.
The Format window appears.
8
Set the desired output size (resolution).
9
Click OK.
The VideoImpression window reappears.
10 Click the Record button to start recording.
11 Press the ESC-key on your keyboard to stop.
12 Click the Save button (floppy icon) to save your video on your computer.
"
Note: Depending on your hardware configuration, you may have to select a lower resolution in
order to obtain a smoother video clip. To do so, click the Format button.