AT&T 984 User Manual

Page 4

Table/desk installation
continued from page 3

Connect the power adapter to the telephone.

Use only the power adapter provided with this product.
To obtain a replacement, call

1 (800) 222–3111

Plug one end of the power adapter into the jack labeled POWER
on the back of the phone. Plug the other end into a standard
electrical outlet not controlled by a wall switch.

Initialization.

If no battery is installed when you connect the power cord, the phone
runs a quick self-test and the screen displays

Initializing for about

seven seconds.

NOTE: The phone will run through this same initialization any time it is

reconnected to AC power if a working battery is not installed (for example,
after a power failure or when the unit has been unplugged).

Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial
tone, please see In case of difficulty beginning on page 121 of your
User’s Manual, Part 2 for details.

Standard

electrical

outlet

Power adapter

Power jack

984QSG_(Rev6)ml23.05.06 5/23/06 11:27 AM Page 4

This manual is related to the following products:

984QSG