Apple MAC PRO (Solid-State Drive Replacement) - Manual (Page 4)

073-1349 Rev. A 4 © 2010 Apple Inc. All rights reserved.
Closing the
Computer
1
Replace access panel.
Note: Make sure
latch is up before you
replace panel. If latch
is down, panel will
not seat correctly.
2
Push latch down
to close and secure
access panel.
Warning: Never turn
on computer unless
all its internal/external
parts are in and it is
closed. Operating unit
when open or missing
parts can cause
damage or injury.
Formatting a New Drive
After installing a new (replacement) drive, format it using these steps:
1. Open Disk Utility and select the drive in list to the left.
Note: If you are formatting the primary drive, use Disk Utility program on Install Disk.
2. Click on Partition tab.
3. Click on “Options” and verify GUID is selected if this is a bootable drive.
4. Apply change by clicking on “Partition” button.