Accton Technology EN2216-1 - Manual (Page 2)

2
Hardware Description
Accton’s Ethernet PC Card is a "feature-packed" credit card-
sized adapter for PCMCIA-compliant personal computers.
The card comes in two models (two media couplers to choose
from):
• EtherPair-PCMCIA (EN2216-1)
• EtherDuo-PCMCIA (EN2216-2)
The EtherPair-PCMCIA has a single RJ-45 (10BASE-T) port
for unshielded twisted-pair connection, while the EtherDuo-
PCMCIA has an RJ-45 and BNC (10BASE2) connector.
This product features NE2000 compatibility. You can use the
provided drivers in the driver diskette or use standard NE2000
network drivers.
LED Indicators
The following LEDs are found on both the EtherPair-PCMCIA
and EtherDuo-PCMCIA media couplers.
Transmit/Receive LED
Color: Green
Function: Monitors signals transmitted to and received from
the network.
The green LED labeled Tx/Rx lights up to indicate that the
Ethernet PC Card is transmitting or receiving signals from the
network. The rate of flashing is proportional to the amount of
network traffic.
Link LED
Color: Green
Function: Monitors link status of card's twisted-pair
connection.
This LED lights up to indicate that a valid 10BASE-T link is
established. It is always on under normal operating conditions.
If the LED is off after power is applied, check the RJ-45 port's
cable connection.