Acer K10 - Manual (Page 25)

13
Eng
lis
h
Note: "Saturation" and "Tint" functions are not supported under computer
mode.
Image Setting
Tint Adjusts the color balance of red and green.
• Press to increase the amount of green in the image.
•
Press to increase the amount of red in the image.
Projection Front-Desktop
•
The factory default setting.
Front-Ceiling
• When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear-Desktop
•
When you select this function, the projector reverses the image
so you can project behind a translucent screen.
Rear-Ceiling
•
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Aspect
Ratio
Use this function to choose your desired aspect ratio.
• Auto: Keep the image with original width-higth ratio and max-
mize the image to fit native horizontal or vertical pixels.
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
• 16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display image using a 16:9 ratio.
•
Full: Any types of resolution always fill the whole screen.