Audiovox FPE-1908DV - Manual (Page 22)

E - 22
TV SETUP
Antenna : Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite broadcasts,
CH 1-135) mode are available.
Auto Scan : Search for usable stations and store them in memory.
Auto Scan Add CH : Search for more usable stations and add them in memory. The stations
stored before are still kept.
Channel Skip : Skip weak channels and the channels you don’t like.
Channel No. : Select a different TV channel.
Channel Label : Display and edit the channel label.
DTV Signal : Display the signal strength (for digital TV channels only).
TV MENU (For TV Mode Only)
1. Press the MENU button.
2. Use the or button to select TV, then press
the button to enter the TV settings.
3. Use the or button to select the options
(Antenna, Auto Scan, Auto Scan Add CH,
Channel Skip, Channel No., Channel Label
or DTV Signal). Adjust them using the or
button, or press the button to go into the
detailed settings.
4. Press the MENU button to return to the previous
menu.
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the
normal screen, press the EXIT or MENU button repeatedly.
Channel Skip
1. Use the or button to select a channel.
(Press the button to select the last channel
of the page; press again to go to the next page.
Press the button to select the first channel of
the page; press again to return the previous
page.)
2. Press the ENTER button to shift between On /
Off. (Select On to skip the selected channel.
The channel will not appear when you press
the CH / CH button.)
Channel Label
You can edit a label for each channel.
1. Use the or button to select the number or
letter. Use the or button to move and edit
the next character. Press the ENTER button to
confirm.
2. After editing, the Channel and Channel Label
will be shown on the screen when you press
the DISPLAy button.
English P1-32.indd 22 6/11/2008 12:22:28 PM