Connections, Connecting a pc, Connecting a high-definition (hd) source – Audiovox FPE-1908DV User Manual
Page 14
E - 14
CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/
VGA input on this unit using a monitor cable and audio cable (not included) as shown.
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition (HD) Devices with component video output must be connected to the YUV
input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
(COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and
AUDIO IN - yUV IN).
* May require a subscription
for receiving HD channels.
Check with your cable/
satellite service provider for
details.
To AUDIO IN
jacks
(yUV IN)
To AUDIO
OUT jacks
To COMPONENT
VIDEO IN jacks
(yUV IN)
To COMPONENT
VIDEO OUT jacks
Note:
When connecting a DVD player to the television, the picture resolution is solely dependent upon
the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to
1080i, and this television can support DVD players up to a maximum resolution of 1080i.
Make sure you connect the
cable from the computer (PC
Connector and AUDIO - PC
OUT) to this unit (MONITOR /
VGA and AUDIO - PC IN).
To AUDIO jack (PC OUT)
To PC connector
English P1-32.indd 14
6/11/2008 12:22:21 PM