Alloy Computer Products Network Device NuDOG-MPT - Manual (Page 18)

15
E-Mail: [email protected]
Http://www. X tramus.com
XTRAMUS TECHNOLOGIES
®
In Learning Setting, check the box of Enable Learning to set up Frame Count,
Frame Gap and Tx Pkt Timeout for sending learning packets before task.
Halt on Error determines whether the test should be carried on or stopped when an
error occurs.
Allow Frame Loss determines the number of frame loss allowed to establish test
criterion.
In VALN Setting, check the box of Enable VLAN Tag to enables to set up VLAN Tag
as the four listed items.