Alloy Computer Products Network Device NuDOG-MPT - Manual (Page 13)

10
E-Mail: [email protected]
Http://www. X tramus.com
XTRAMUS TECHNOLOGIES
®
4.1.1 Configuration Setup
Configuration Setup includes two settings, Environment and Tasks.
Environment refers to the surroundings and conditions of the configuration settings
while Tasks refers to which task(s) selected to be tested.
Task Setting contains two parts. The upper half is Test Scenarios and Task
Selected
. The lower half covers 3 tabs: Transmit (transmitting parameters), Media
Type
and Learning and Other.
4.1.2 Task Setting
4.1.2.1 Test Scenarios
All pre-built tests (total of 16) are provided in this test scenario. Click mouse on any
desired test(s) and use or button to add or countermand the tests
needed to be performed.