Amana NAH6800 - Manual (Page 5)

HEAVY – Use for cleaning heavily soiled loads.
MEDIUM – Use for cleaning moderately soiled loads.This
setting will be appropriate for most loads.
LIGHT – Use for cleaning lightly soiled loads.
QUICK WASH – The QUICK WASH setting offers a
quick cycle time. Suggested uses include freshening newly
purchased clothes, or clothing that has been packed away.
RINSE & SPIN – Choose this setting to rinse only and
then spin.
HEAVY
MEDIUM
LIGHT
SOIL
LEVELS
SPECIAL
CYCLES
QUICK
WASH
RINSE
& SPIN
W
Step 4
S
ELECT
S
OIL
L
EVEL OR
S
PECIAL
C
YCLES
Press the appropriate pad to select the soil level or special cycle.
O
PERATING
I
NSTRUCTIONS
4
OPTIONS
DELAY
WASH
STAIN
TREAT
PRESOAK
EXTRA
RINSE
P
SPIN ONLY FASTER SPIN LONGER SPIN SIGNAL
SPIN OPTIONS
E
Step 5
Press the appropriate pad(s) to select one or more options.
DELAY WASH – Allows the start of any cycle to be delayed for up to 9
hours. Make the appropriate selection for your load, then press the DELAY
WASH pad once for one hour or press the pad again to increase the delay
wash time up to 9 hours in one hour increments.
STAIN TREAT – Adds time to the wash and rinses for better stain
removal.Automatically provides a fourth rinse.
PRESOAK – Adds 15 minutes of mostly soaking with minimal tumbling
before the regular cycle. Can be selected with any cycle.
EXTRA RINSE – A fourth rinse at the end of the cycle to more
completely remove laundry additives and perfumes.
SPIN ONLY – Spins only.
FASTER SPIN – Use for jeans, towels and bedding. Removes more water
from loads during spin.
LONGER SPIN – Use for jeans, towels and bedding. Removes more
water from loads during spin by adding one minute to the spin time.
S
ELECT
O
PTIONS
S
ELECT
S
PIN
O
PTIONS
/S
IGNAL
NOTE: To minimize wrinkling of wrinkle free fabrics, the FASTER SPIN
and LONGER SPIN options are not recommended. Do not overload
the washer.
SIGNAL – Press the “+” or “-” SIGNAL pad to increase or decrease the end of cycle signal volume.