Step 3, Step 2, Perating – Amana NAH6800 User Manual
Page 4: Nstructions, Wash/rinse temp, Fabric cycles o

NOTE: In wash water temperatures below 60˚ F, detergents do not dissolve well or clean well. Care labels define cold water
as up to 85˚ F.
3
O
PERATING
I
NSTRUCTIONS
Step 3
Press the appropriate “ ” or “ ” pad to select the wash and rinse water
temperatures. Follow the garment care label and chart below for best results.
HOT/COLD – Whites and heavily soiled color-fast items
WARM/WARM – Color-fast items.When warm rinse is selected,only the third
rinse will be warm.The first and second rinses will be cold to conserve energy.
WARM/COLD – Moderately soiled color-fast items;most wrinkle free items
COLD/COLD – Brightly colored, lightly soiled items; washable woolens
TEMP-ASSURE (select models) – The controlled heating feature can be used
with any wash/rinse temperature to optimize cleaning performance.When on, the
water heater will help maintain the wash water temperature during the wash cycle.
IMPORTANT: The washer features an automatic temperature control to provide a warm wash of approximately 105˚ F and cold wash
of approximately 65˚ F.
While the washer is filling, you may notice just hot and/or just cold water going through the dispenser when cold or warm wash temperatures
are selected. This is a normal function of the automatic temperature control feature as the washer determines the temperature of the water.
S
ELECT
W
ASH
/R
INSE
W
ATER
T
EMPERATURES
HOT/COLD
WARM/WARM
WARM/COLD
COLD/COLD
H
WASH/RINSE TEMP
TEMP-ASSURE
CONTROLLED HEATING
Press the appropriate pad for the type of load.This will determine the tumble/pause pattern and spin speed for the cycle.
Step 2
HAND
WASH
DELICATES
FABRIC CYCLES
O
NO-IRON
WEAR
COTTON/
STURDY
D
NOTE: To minimize wrinkling of loads, select NO-IRON WEAR fabrics setting.
S
ELECT
F
ABRIC
C
YCLES
HAND WASH – Alternating periods of short and long soak and gentle
spin speed. Use for items labeled “hand wash”.
DELICATES – Gentle tumble action and gentle spin speed. Use for
dress shirts/blouses, nylons and sheer or lacy garments.
NO-IRON WEAR – Reduced tumble pattern and spin speed to
reduce wrinkling. Use for dress shirts/pants, wrinkle free clothing and
poly/cotton blend clothing.
COTTON/STURDY – Normal tumble pattern and high speed spin.
Use for towels, jeans, sheets, linens, underwear and t-shirts.