Brother ADS-2000 - Manual (Page 10)

10
LED Indications
Storage Full
The connected USB flash memory drive is full. Press any key and then do one of
the following:
 Delete unused files or folders from the USB flash memory drive and then try
again.
 Use a USB flash memory drive that has available space.
Protected Device
The connected USB flash memory drive is write-protected. Disconnect the
protected USB flash memory drive, press any key and then do one of the
following:
 Turn off the USB flash memory drive’s write-protection and then try again.
 Use a USB flash memory drive that has write-protection turned off.
Unsupported Device
Remove the unsupported USB device, such as a mouse or mobile device that
does not support USB flash memory drive mode, from the USB direct interface.
Hub is Unusable
A Hub or USB flash memory drive with Hub has been connected to the USB
direct interface. Disconnect any unsupported devices, such as a USB hub or a
USB flash memory drive that contains a hub.
Access Error
The USB flash memory drive was disconnected when being accessed. Press any
key.