Brother DCP-165C - Manual (Page 23)

Loading documents and paper
11
2
How to load envelopes and post cards
2
a
Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
If envelopes or post cards are ‘double-
feeding’, put one envelope or postcard in
the paper tray at a time.
b
Put envelopes or post cards into the paper tray
with the address side down and the leading
edge in first as shown in the illustration. With
both hands, gently press and slide the paper
side guides (1) and paper length guide (2) to fit
the size of the envelopes or post cards.
If you have problems when printing on
envelopes, try the following suggestions:
2
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
c
Adjust the size and margin in your
application.
Removing small printouts
from the machine
2
When the machine ejects small paper onto
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
2
1