Commissioning the answering machine (o, Commissioning – Auerswald 1500 User Manual
Page 17
Commissioning
17
Manual on the CD included in the package) but also using the computer
software included in the package (recommended; see
ġ
If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
). Information about new
features and updates is available on the support pages at the Auerswald
website (Internet address: www.auerswald.de).
Commissioning the Answering Machine (only for COMfortel 2500)
Requirements
✔
Telephone with firmware version 3.6B or higher.
✔
Standard SD card with the following features:
í
SD memory card specification 1.01 with a capacity of up to 2 GB.
According to the SD memory card specification 2.00, larger SDHC cards
are not supported.
í
FAT16 formatting. An SD card formatted as FAT32 can be reformatted
in the telephone after commissioning. To do this, press the menu key
and enter “#206” (also see the manual on the enclosed CD).
Note: In the COMfortel 2500 AB (special COMfortel 2500 model), the
COMfortel Voicemail function and the SD card with various professional
announcements required for it are included in the factory settings. The
answering machine can be used immediately after commissioning the tele-
phone. The step for inserting the SD card as described here is omitted.
Steps to take
1.
Open the plastic cover to the left on the back of the system telephone (see
2.
Insert the SD card with the contacts directed upwardly first into the slot (see
3.
Close the plastic cover again.
1
When
is shown at the bottom right of the display, this indi-
cates that the SD card has been initialized and the required direc-
tory structure has been created.
1
As soon as the
symbol is shown instead of
, the answer-
ing machine is ready to start. Inbound calls are accepted (at first
without an announcement).
☞