AT&T AT3111-2 - Manual (Page 11)

Telephone operation
7
Ringer volume
The ringer volume can be adjusted either by the
volume control on the right side of the handset,
or in the handset menu.
To change the ringer volume:
1. With the handset idle, press the volume button
VOL or VOL to display the current volume
level on the screen.
on the screen.
2. Press VOL or or VOL to choose the desired to choose the desired
volume level. When finished, the new volume
level will be saved.
-OR-
1. Press
MENU/
SELECT
from the idle mode.
2. Press CID or to select >RINGER VOLUME, then
press
MENU
/SELECT.
3. Press CID or to adjust the volume. A
sample of each ringer volume will be played
when scrolling through the choices.
4. Press
MENU
/SELECT to save and you will hear a
confirmation tone.
NOTE:
1. Ringer will be off if the volume is set to zero, and the
will be displayed.
2. The ringer volume level also determines the ringer levels
of intercom calls (pages 18-20) and the paging tone when
initiating the handset locator feature (page 13). If the
handset ringer volume level is set to off, that handset is
silenced for all incoming calls and paging.
Ringer tone
This feature allows you to choose from ten ringer
tones.
To choose a ringer tone:
1. Press
MENU/
SELECT
from the idle mode.
RINGER VOLUME
RINGER TONE
Handset settings