AT&T 360 - Manual (Page 12)

10
Removing All Calls from Call History
1 Press C to enter the call history.
2 Press and release r for 1.5 seconds when no call is displayed.
The screen displays
REMOVE ALL CALLS?.
3 Press and release r for 1.5 seconds again to remove all calls.
The screen displays
END OF LIST.
Display Dial
As you review the call history, you can dial a displayed phone number.
If the call information came from your home area code (the one you
programmed at installation), the screen displays only the seven-digit
number you are calling (without an area code). If you receive a call
from an area code not programmed into the telephone, the screen will
display the ten digits of the phone number, and will automatically dial
the “1” before the area code.
1 Press C, then use + or - to locate the number you want
to call.
2 Lift the handset, then press and release
D
to call the number
on the screen. You cannot dial PRIVATE or UNKNOWN calls.
CALLER ID OPERATION