Transmille EA008 - Manual (Page 9)

EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER
OPERATION MANUAL
Transmille Ltd. Page 9
Null Function (Current Measurement)
The null function allows each current range to be nulled independently.
To set the null, the terminals should be OPEN CIRCUIT.
If auto range is selected, the virtual front panel will step through each range and perform
a null.
Set Infinity Function
(Resistance Measurement)
The set infinity function allows
The infinity point of each range to be set independently.
To set the infinity, the terminals should be OPEN CIRCUIT.
If auto range is selected, the virtual front panel will step through each range and set
infinity.
Care & Maintenance
The only maintenance instructions for the adapter is periodic cleaning.
See below for details on the cleaning procedure and precautions for handling.
Cleaning the Adapter
To keep the external enclosure of the adapter in good condition, clean the outer case with
a soft cloth. Do not use any liquids in cleaning the enclosure – removal of surface dust is
all that is recommended.
CAUTION
Do not use cleaning fluids or solvents for cleaning as these may damage the
enclosure and affect the plastic materials used in the adapter.