Timeguard CB008 - Manual (Page 3)

2
Before use always test
the RCD Adaptor. To test
1 RESET - plug the Adaptor into a 13
amp socket and switch the socket on.
Press the green RESET button. The
indicator flag window should turn
from BLACK to RED (RESET condition).
2 TEST - now press the blue TEST
button. The indicator flag window
should turn from RED to BLACK. This
shows that the Adaptor has cut out
(TRIPPED).
3 RESET - press the RESET button again,
the indicator flag window should
again turn from BLACK to RED.
If all the above operations work
satisfactorily, the Adaptor is safe to
use. IF NOT DO NOT ATTEMPT TO USE
THIS ADAPTOR. UNPLUG THE CIRCUIT
BREAKER FROM THE MAINS SOCKET
AND SEEK PROFESSIONAL ADVICE.