Agri-Fab 45-03261 - Manual (Page 8)

8
ASSEmBLY OF HOPPER BAG
1. (Figure 11) Turn a rear hopper tube so that the brace
holes in the middle of the tube face down.
2. (Figure 12) Insert the two upper hopper side tubes
through the stitched flaps on each side of the hopper
bag.
3. (Figure 12) Assemble the ends of the rear hopper tube
onto the ends of the upper hopper side tubes. Fasten
together using plastic plugs (Z).
11
12
ENGLISH
REAR HOPPER TUBE
(brace holes on bottom)
UPPER HOPPER
SIDE TUBE
PLASTIC PLUG (Z)
14. (Figure 10) Place the star washer (L) between the
height adjustment handle and the height adjustment
strap. Insert the 5/16" x 1" carriage bolt (F) through
the height adjustment handle, the star washer and the
height adjustment strap. Assemble a 5/16" flat washer
(K) and the plastic knob (X) onto the end of the bolt.
10
5/16" FLAT
WASHER (K)
5/16" x 1"
CARRIAGE BOLT (F)
PLASTIC KNOB (X)
STAR WASHER (L)
(between strap and handle)