Takagi T-H3J-DV/OS - Manual (Page 2)

SPECIFICATIONS
T-H3J/T-H3S MODELS
.95 EF
Primary Heat Exchanger is
constructed of HRS35
Commercial-Grade Copper which
is more resilient against erosion
Secondary Heat Exchanger
is made of Type 316L
Stainless Steel
3" venting up to 70 ft
4" venting up to 100 ft
Indoor model includes
a built-in temperature controller
and advanced diagnostics
Outdoor model includes a wall
mount temperature remote
controller and advanced
diagnostics which can be
installed up to 400 ft from unit
100-140 degrees (5 degree
intervals settings)
T-H3 MODELS
.95 EF
Primary Heat Exchanger is
constructed of HRS35
Commercial-Grade Copper which
is more resilient against erosion
Secondary Heat Exchanger is
made of Type 316L Stainless Steel
3" venting up to 70 ft
4" venting up to 100 ft
Indoor model includes a built-in
temperature controller and
advanced diagnostics
Outdoor model includes a wall
mount temperature remote
controller and advanced diagnostics
which can be installed up to 400 ft
from unit
100-185 degrees (17 settings in
5 degree intervals)
Easy Link up to 4 units (with
no additional parts or
accessories needed)
Multi-Link up to 20 units
All dimensions are in inches.
15-150 psi Water Pressure. 40 psi or above is recommended for maximum flow.
*Current numbers based on factory testing; 0.4 GPM required for continuous fire after initial ignition.
Indoor models are certified from sea level to 10,100 ft. elevations.
In accordance with ANSI Z21.10.3, CO emission does not exceed 400 PPM for normal input.
The manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligation.
MODEL
NUMBER
FUEL
TYPE
GAS CONSUMPTION
INPUT
INLET GAS
PRESSURE
ENERGY
FACTOR
(EF)
MAX
GPM*
HOT/COLD
GAS
CONN.
DIMENSIONS IN INCHES
UNIT
WEIGHT
(LBS)
MIN.
BTU/H
MAX.
BTU/H
MIN.
W.C.
MAX.
W.C. HEIGHT WIDTH DEPTH
INDOOR
T-H3J-DV-N Natural 15,000 160,000 5.0 10.5 0.95 6.6 3/4” NPT 22-1/2 17-3/4 10-3/4 58
T-H3J-DV-P Propane 13,000 160,000 8.0 14.0 0.95 6.6 3/4” NPT 22-1/2 17-3/4 10-3/4 58
T-H3S-DV-N Natural 15,000 180,000 5.0 10.5 0.95 8.0 3/4" NPT 22-1/2 17-3/4 10-3/4 58
T-H3S-DV-P Propane 13,000 180,000 8.0 14.0 0.95 8.0 3/4" NPT 22-1/2 17-3/4 10-3/4 58
T-H3-DV-N Natural 15,000 199,000 5.0 10.5 0.95 10.0 3/4" NPT 22-1/2 17-3/4 10-3/4 59
T-H3-DV-P Propane 13,000 199,000 8.0 14.0 0.95 10.0 3/4" NPT 22-1/2 17-3/4 10-3/4 59
OUTDOOR
T-H3J-OS-N Natural 15,000 160,000 5.0 10.5 0.95 6.6 3/4” NPT 22-1/2 17-3/4 10-3/4 58
T-H3J-OS-P Propane 13,000 160,000 8.0 14.0 0.95 6.6 3/4” NPT 22-1/2 17-3/4 10-3/4 58
T-H3S-OS-N Natural 15,000 180,000 5.0 10.5 0.95 8.0 3/4" NPT 22-1/2 17-3/4 10-3/4 58
T-H3S-OS-P Propane 13,000 180,000 8.0 14.0 0.95 8.0 3/4" NPT 22-1/2 17-3/4 10-3/4 58
T-H3-OS-N Natural 15,000 199,000 5.0 10.5 0.95 10.0 3/4" NPT 22-1/2 17-3/4 10-3/4 59
T-H3-OS-P Propane 13,000 199,000 8.0 14.0 0.95 10.0 3/4" NPT 22-1/2 17-3/4 10-3/4 59
NEW PRODUCT
SPOTLIGHT
••••
••••
••••
••••
FEATURES
••••
••••
••••
••••
ANSI Z21.10.3 CSA 4.3
®
(T-H3 models)
© 2012 Takagi. All rights reserved. TBGSM00413
Condensing High Efficiency Gas Tankless Water Heaters
T-H3J-DV
T-H3J-OS
T-H3S-DV
T-H3S-OS
T-H3-DV
T-H3-OS
TBGSM00413 Takagi Tankless Sales Slick_AOS Tankless Sales Slick 10/1/12 1:08 PM Page 2