Audiovox AVP-7380 - Manual (Page 18)

128-6163
18 of 24
18
b. Unloading the Cassette:
If the VCP is in the playback mode, press the STOP/
EJECT button twice; the first press will stop tape play,
and the second press will eject the tape.
NOTE: The cassette will be ejected even if VCP power
is off, as long as the unit is connected to the
power source.
4. AUTO MEMORY
Press the AUTO MEMORY key for searching and storing
automatically the TV channels with on-screen display,
the unit will start to play the first channel automatically.
5. SKIP SEARCH
a.
Press the SKIP SEARCH key until SKIP MODE ON is
displayed on the screen. Then if using the channel up
and down keys, the TV will stop only on the active TV
channels.
b. Press the SKIP SEARCH key until SKIP MODE OFF is
displayed on the screen. Then all the TV channels will
be shown using the channel up and down keys.
6. CHANNEL UP/DOWN
Press the CHANNEL UP and DOWN keys to get your
desired TV channel.
7. DIRECT ACCESS
Press the number keys to make a direct TV channel
selection. The channel number chosen will be displayed on
the screen for about 4 seconds.