Raytec VARIO w2 - Manual (Page 6)

6 www.rayteccctv.com UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
VARIO LED Status Indicators (in Normal Operating Mode)
VARIO LED Status Indicators (in Programming Mode)
Feedback system
GREEN
GREEN
AMBER
AMBER
RED
RED
SOLID GREEN status LED indicates unit has power
applied.
FLASHING GREEN status LED indicates a problem
with the remote control IR receiver. The maximum
remote operating distance is 8m (26ft).
FLASHING AMBER status LED indicates unit is in
programming mode. SOLID AMBER indicates unit
receiving valid command from remote control device.
SOLID RED status LED indicates an internal LED fault,
and a FLASHING RED status LED indicates that there
is a problem with the input voltage. (Please note – once
the voltage problem has been corrected, the user must disable
remote control set-up or power the unit on and off to stop the
RED status LED flashing)
SOLID GREEN status LED indicates unit has power
applied.
FLASHING GREEN status LED indicates a problem
with the remote control IR receiver. The maximum
remote operating distance is 8m (26ft).
SOLID AMBER status LED (non flashing) indicates a
problem with the input voltage level.
(Please note – once the voltage problem has been corrected,
the user must disable remote control set-up or power the unit on
and off to extinguish the AMBER status LED)
SOLID RED status LED indicates an internal LED fault.