Raytec VARIO PSU - Manual (Page 2)

Installation
Warnings
1 Select interchangeable lens
and mount VARIO illuminator
VARIO is factory set and delivered with a
35˚ beam width. To alter to 10˚, simply
remove interchangeable holographic
diffuser (IHD). To alter to 60˚, replace with
other IHD supplied.
2 Mount PSU
Mount PSU on wall/flat surface with
glands facing down
3 Connect illuminator to PSU
VARIO PSU provides 24V DC
Wiring
– six core cable
Red wire +
Black wire -
Installers can extend or reduce lead length using
appropriate cable and weather proof box