NUUO SCB-A08 - Manual (Page 17)

Trusted Video Management
NUUO Surveillance System - Accessory
- 16 -
 Console – When this mode is selected and the server is updated, a PC running a communication
program such as Hyperterminal can communicate with the serial server via the Console Mode serial
port (Port 1 on SCB-A08), displaying the Server Properties screen and allowing configuration of the
server and its ports. (under 4000 port)
 Upgrade – When this mode is selected and the server is updated, firmware can be uploaded into the
serial server via the Console Mode serial port or a virtual COM port mapped to the number of the
Console Mode serial port. (under 4000 port)
 Default – When this mode is selected and the server is updated, it will revert the server to its default
configuration. (under 4000 port)
 RS-232 – When this mode is selected and the server is updated, the selected serial port will become a
RS-232 serial port on the server.
 RS-422 – When this mode is selected and the server is updated, the selected serial port will become a
RS-422 serial port on the server.
 RS-485 – When this mode is selected and the server is updated, the selected serial port will become a
RS-485 serial port on the server.
- Connection at: When the Connection Mode field is set to Client or Client (no heartbeat), this field
becomes active, allowing the SCB-A08 (acting as a client) to connect to the server either on Power up or
on Data Arrival (first character arriving).
- Maximum connection: When the Connection Mode field is set to Client or Client (no heartbeat), this field
becomes active, allowing the SCB-A08 (acting as a client) to connect to the server either on Power up or
on Data Arrival (first character arriving). (Suggest use default setting)
- Remote IP address: This is a security feature that is activated when the IP address of the desired client is
programmed into the remote IP Address setting of the menu. This tells the SCB-A08 to communicate with
only the listed IP address and to filter out all other requests for connection. The SCB-A08 is setup in the
menu as a TCP or UDP server to us this feature. The default setting is 255.255.255.255. It is recommended
not to change this setting until the application has been tested and is communicating properly. At that
point the address filtering feature of the SCB-A08 can be activated. (Suggest use default setting)
Step 2: Updated server properties separately for each serial port.