Milestone AXIS A1001 Network Door Controller Plug-in - Manual (Page 7)

Milestone XProtect ® Access Control
Module AXIS A1001 Network Door
Controller Plug-in
Getting Started Guide
www.milestonesys.com 7 Configuration and Maintenance
Configuration and Maintenance
First time configuration
After installing the XProtect Event Server plug-in, set up an integration to the AXIS A1001 system.
1. Open the Management Application or Management Client.
2. Right-click the Access Control node to create a new integration.
This example is from the Management Application.
3. In the new dialog box, select the AXIS A1001 Network Door Controller integration plug-in.
4. Fill out relevant fields to connect to the AXIS A1001 system and click Next.
Name Description
Name
Display name of the access control system within the XProtect
VMS.
Address
Network address to the AXIS A1001 system. In a system with
multiple connected AXIS A1001 controllers an arbitrary
controller may be selected to represent the system.
Port Network port for the AXIS A1001 system.