Rftctemp2000a general specifications, Product user guide – MadgeTech RFTCTemp2000A User Manual
Page 8

Product User Guide
Reading Rate 1 reading every second up to 1 reading every 24 hours
Memory
16,128 per channel
LED Functionality
• Green LED blinks every 5 seconds to indicate unit is logging
• Blue LED blinks every 15 seconds to indicate unit is in wireless mode
• Red LED blinks every 1 second to indicate alarm condition
Wrap Around Yes
Start Modes Immediate Start
Channels
1 Internal & 1 Remote
Calibration Digital calibration through software
Calibration Date Automatically recorded within device
Battery Type 9V lithium battery included; user replaceable
Battery Life
3 years typical at 1 minute reading rate
Data Format
• For Display: °C or °F
• For Software: Date and time stamped °C, K, °F, or °R
Time Accuracy ± 1 minute/month
Computer Interface
USB to mini USB, 250,000 baud for standalone operation or RFC1000
required for wireless operation
Software XP SP3/Vista/Windows 7/Windows 8
Operating
Environment
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions
3.0 in x 3.5 in x 0.95 in
(76.2 mm x 88.9 mm x 24.1 mm) - Data logger only
Weight 4.1 oz (0.2563 lbs)
Material
ABS Plastic
Alarm
User configurable audible, on-screen, email and text (SMS) alarms.
Alarm Delay: A cumulative alarm delay may be set in which the device
will activate the alarm (via LED) only when the device has recorded a
user specified time duration of data.
Audible Alarm
Functionality
1 Beep per second for reading alarm above/below threshold
Approval US (FCC), CA (IC), CE, South Korea (KCC), China (CMIIT), Japan (LCIE)
RFTCTemp2000A General Specifications
6
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm
or more should be maintained between the antenna of this device and persons during operation. To ensure compliance,
operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.