AT&T 2355 - Manual (Page 54)

51
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Record announcement Press
* 7; after beep, record
announcement, press # 5 to stop. System
plays back announcement.
Record memo Press
* 8, then the mailbox number
where you want memo recorded; speak
after the system announces “Now
recording
;”press
# 5 to exit.
End remote access call Press
* 0.
Turn system off Press
# 0; the system announces,
“Machine off.” Press
# 0 again to turn
the system back on.
Turn system on When system is off, it answers after 10
rings and announces,“Please enter your
remote access code
.” Press
#, then enter
your remote access code.
NOTE: The remote access call automatically ends if you don’t
press a key within 20 seconds (other than when recording or
playing messages or announcements).
REMOTE ACCESS REMOTE ACCESS