AT&T 1855 - Manual (Page 20)

18
Answering System Operation
MEMO
ANNC
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
To begin, press and hold the
CLOCK
button for 2 seconds.
The system uses voice prompts to guide you.
Each time you press
SKIP
, the day, hour, minute or year
advances by one. Each time you press
REPEAT
, the day,
hour, minute or year is reduced by one.When you hear
the correct setting, press
CLOCK
to move to the next
setting.
To check day and time
You can press
CLOCK
at any time to hear the
current day and time without changing it.
1 CLOCK
“Sunday”
2 SKIP/REPEAT
“Monday”
Press until correct day is spoken.
4 SKIP/REPEAT
“1 PM”
Press until correct hour is spoken.
3 CLOCK
“12 PM”
6 SKIP/REPEAT
“1”
Press until correct minute is spoken.
5 CLOCK
“0”
8 SKIP/REPEAT
“2005”
Press until correct year is spoken.
9 CLOCK
“Monday, 1 pm, 2005”
7 CLOCK
“2004”
NOTE: The answering system must be on to review or change settings.
ATT-1855CIB-d05.qxp 4/8/2005 5:38 PM Page 18