AT&T 1855 - Manual (Page 15)

MEMO
ANNC
LLE R ID / MESSAGE
S
MEMO
ANNC
CA
LLE R ID / MESSAGE
S
13
Memory Dialing
Entering numbers
One touch dialing (M1-M3)
To program One Touch buttons:
1 Press
PROG/MEM
.
2 Enter a telephone number (up to 24 digits), or
import one by pressing
REDIAL
or
REPEAT/MEMO
.
3 Press
PROG/MEM
.
4 Press a One Touch button (
M1, M2, M3
).
5 Repeat steps 2-4 to program another button, or
press
REMOVE
to save and exit.
Speed dialing (1-9)
1 Press
PROG/MEM
.
2 Enter a telephone number (up to 24 digits), or
import one by pressing
REDIAL
or
REPEAT/MEMO
.
3 Press
PROG/MEM
.
4 Press a digit to select the location you want (
1-9
).
5 Repeat steps 2-4 to program another memory
location, or press
REMOVE
to save and exit.
Options while entering numbers
• Press
SKIP
to erase numbers if you make a mistake.
• Press
REPEAT
twice to enter a 3-second dialing pause.
• Press
REMOVE
to exit without saving the number.
To change numbers
To change a number, follow the steps above to enter
another number in its place.
Press PROG/MEM, then enter number
555 1234
ENTER NUMBER
0
MSG#
Press PROG/MEM, then press button
(M1-M3) or enter location (1-9)
ENTER LOCATION?
0
MSG#
Repeat to enter another number, or
press REMOVE to exit.
STORED
0
MSG#
ATT-1855CIB-d05.qxp 4/8/2005 5:38 PM Page 13
To program Speed Dialing memory locations: