Audio2000's AKJ780E - Manual (Page 12)

Rear Panel
11 10 12 13 15 16 17 14
9
230
PRE-OUT
Serial Number
Made in P.R.C.
Descriptions and Functions
- Connect AC MAIN POWER CORD from the wall outlet to this terminal.
jacks - These XLR jacks are for connecting MASTER output to an
external device with balanced cables.
- These jacks are for connecting microphones via BALANCED
XLR-type microphone cables.
10.AC~IN TERMINAL
11.
12.
1 .BAL ANCED AUDIO OUTPUT
17.BAL ANCED MIC 1-2 INPUT (XLR)
13.AV 1 / 2 INPUT
14.VIDEO OUT 1-2 (RC A)
15.AUDIO OUT 1-2 (RC A)
jacks - These jacks are for connecting AUDIO/VIDEO OUTPUT from external AV
SOURCES. Connect RCA-style AV cables (R, W, Y) from these jacks to the AV OUTPUT jacks
on your external AV devices.
- These jacks are for connecting the 's VIDEO OUTPUT to TV
or DISPLAY devices. Connect RCA-type patch cables from these jacks to the VIDEO INPUT jacks
on the connecting TV or display devices.
- These jacks are for connecting the AUDIO OUTPUT to an amplifier,
recording or mixing devices. Connect paired RCA-type patch cables from these jacks to the appropriate
INPUT jacks on external audio devices.
6
AC POWER
PRE OUT
outlet - This outlet provides AC POWER to an external device.
jacks-Connect one end of ¼-inch cables to the left and right PRE-OUT jacks on the AKJ780E.
Connect one end of the ¼-inch cables to the left and right AUDIO/LINE/AUX INPUT jacks on the
external device.
jacks AKJ780E
jacks AKJ780E
jacks
Note: Do not connect any device with a power consumption level higher than 200W.