Thermo Fisher Scientific Alpha pH 2000 User Manual
Alpha ph 2000
Table of contents
Document Outline
- 1 INTRODUCTION
- 2 PRODUCT DESCRIPTION
- 3 ASSEMBLY AND INSTALLATION
- 4 NORMAL OPERATION
- 5 CALIBRATION MODE
- 6 SET-UP MODE
- 6.1 Enter Setup mode
- 6.2 Electrode Offset (OFS) sub-function
- 6.3 Setting temperature (Set oC) sub-function
- 6.4 Control Relay A/Control Relay B (SP1/SP2) sub-function
- 6.5 Controller (CNTR) sub-function
- 6.6 Current Output 1 sub-function
- Current Output 2 sub-function
- 6.7 Wash relay (WASH) sub-function
- 6.8 Configuration (CNFG) sub-function
- 6.9 Calibration (CAL) sub-function
- 7 RELAY MODES
- 8 TECHNICAL SPECIFICATIONS
- 9 ACCESSORIES
- 10 GENERAL INFORMATION
- 11 APPENDICES
- 11.1 Appendix 1 – Unit fuse and jumper settings
- 11.2 Appendix 2 – pH buffer values at various temperatures
- 11.3 Appendix 3 –Simple explanation on the function of hysterisis
- 11.4 Appendix 4 – General instructions concerning Controller Setting
- 11.4.1 Control characteristic of Controllers used as limit value switch
- 11.4.2 Control characteristic of P-Controller as proportional controller
- 11.4.3 Control characteristic of PI-Controller as a proportional integral controller
- 11.4.4 Controller signal of Pulse length Controllers
- 11.4.5 Controller signal of Pulse Frequency Controllers
- 11.5 Appendix 5 – Abbreviations used in menu displays