Thermo Fisher Scientific EC620130 Series Combination pH Electrodes - Manual (Page 5)

www.thermofisher.com
REPLACEMENTS & ACCESSORIES
Catalog No. Description
EC-BU-1BT pH 1.68 Buffer Solution, 480 mL
EC-BU-4BT pH 4.01 Buffer Solution, 480 mL
EC-BU-7BT pH 7.00 Buffer Solution, 480 mL
EC-BU-9BT pH 9.00 Buffer Solution, 480 mL
EC-BU-10BT pH 10.01 Buffer Solution, 480 mL
EC-BU-12BT pH 12.45 Buffer Solution, 480 mL
EC-DPC-BT Protein Cleaning Solution for pH electrode
ECRE006 Storage Solution for pH electrode
EC-BU-4BTC1LIT pH 4.01 Buffer Solution (Red), 1 L
EC-BU-7BTC1LIT pH 7.00 Buffer Solution (Yellow), 1 L
EC-BU-10BTC1LIT pH 10.01 Buffer Solution (Blue), 1 L
EC-BU-4BS pH 4.01 Buffer Sachets, (NIST traceable)
EC-BU-7BS pH 7.00 Buffer Sachets, (NIST traceable)
EC-BU-10BS pH 10.01 Buffer Sachets, (NIST traceable)
EC-RIN-WT pH Deionized Water Rinse Sachets (NIST traceable)
Figure 1: Proper attachment and detachment of storage bottle to prevent electrolyte leakage
WARRANTY
This electrode is supplied with a six-month warranty against significant deviations in material and
workmanship.
Exclusions
The warranty on your instrument shall not apply to defects resulting from:
ƒ Improper or inadequate maintenance by customer
ƒ Unauthorised modification or misuse
ƒ Operation outside of the environment specifications of the products
Ring
(for covering filling hole)
Storage bottle cap, with
rubber gasket
Storage bottle
(with solution inside)
Step 1: Keep the ring close.
Unscrew the storage bottle cap and remove the bottle.
Next, remove the cap with the rubber gasket.
Step 2: Rotate the ring and open the filling hole.
Step 1: Keep the fill hole open.
Mount the cap with the rubber gasket.
Next, attach the storage bottle, electrode close to the base of the bottle.
Screw the storage bottle onto the cap tightly.
Step 2: Rotate the ring to close the filling hole.
Store your electrode.
Detachment of storage bottle for measurement
Step 1 Step 2 Step 2 Step 1
Attachment of storage bottle for storing electrode
Start your measurement.