Thermo Fisher Scientific Eutech CON 700 - Manual (Page 13)

9
2) To recall data from memory, press . The location of the most
recent stored data is displayed first. Press or to select the
location of the desired data, then press to accept.
3) Press to return to the stored data location. Press to return
to measurement mode. To erase stored data, see Section 6.14.
6. SETUP FUNCTIONS
Use the set up mode to customize your instrument operation. During
measurement, press and hold for 5 seconds to enter SETUP
mode.
Press or to change programs or change options.
Press to select the program or confirm selection.
Press to go back one level or return to measurement mode.
6.1 P1.0 CAL (Calibration)
Press to view stored calibration points in each range.
6.2 P2.0 ELE (Electrode Information)
Press to view cell efficiency in each range.
6.3 P3.0 ConF (Configuration)
Press to access set-up programs 3.1 thru 3.9.
6.4 P3.1 rdY (Ready / Stability Indicator)
Press .