Aiwa MM-VX200 - Manual (Page 6)

6
ENGLISH
5 CONNECTING THE
PLAYER TO YOUR PC
Use the supplied USB cable to connect
this player to your PC, as follows:
Connect the series B connector to the
USB port connector of the player and the
other plug to the USB port connector of
your PC.
If a plug is already connected to the USB
port connector of your PC, disconnect it
before connecting this player.
Do not disconnect the USB plug during
downloading or uploading the files to
prevent the error of your PC.
Connecting an AC adaptor
To use on AC house current, contact your
nearest Aiwa service personnel and
purchase an AC adaptor Aiwa AC-D302.
Connect the AC adaptor:
1 to the DC 3 V jack of the player
2 to a wall outlet
6 SmartMedia-ID
INSTALLATION
Before inserting a SmartMedia-ID, be sure
to turn off the power of the player and
disconnect the USB plug from the USB
port connector.
Insert the SmartMedia-ID into the slot in
the correct direction as follows.
USB port
Supplied USB cable
USB port connector
A C - D 3 0 2
D C 3 V
Series B
connector
Series A connector