TEKTON 5632 - 9-pc. 5 lb. Slide Hammer Dent Puller Set - Manual (Page 3)

page 2
Tip Assembly Diagram
Maintaining Dent Puller
Basic Operation
Store dent puller and all accessories in a dry location. To ensure smooth operation keep
shaft of dent puller clean and free of moisture. After each use and before storage apply a
few small drops of machine oil or silicone spray to shaft of dent puller.
Grasp handle and apply consistent pulling force.
Grasp hammer.
Dented area
While applying consistent pull on handle, quickly draw slide hammer back to impact
handle. This impact generates necessary pulling force. Repeat until dent is pulled.