Seametrics TB User Manual
Dis con tin ued, Tb turbine flow meter instructions

TB Turbine Flow Meter
Instructions
The TB are bronze-bodied turbine meters designed for
use in pipe sizes 1-1/2" to 4". High-quality jewel bear-
ings and ceramic shafts are used in the standard ver-
sion. Low-flow performance is superior. The rotation of
the rotor is detected by a non-drag Hall-effect sensor.
Output is a pulse-type square wave, which can be sent
long distances (up to 2,000 feet) without a transmitter.
This signal can be connected directly to SeaMetrics con-
trols, as well as PLC's, counters, and computer cards.
Battery operation using the FT415 battery-operated Flow
Computer is also available as an option (requires micro-
power sensor).
SeaMetrics TB Turbine Meters are ideal for chemical pro-
portioning applications. If no display is required, a simple
divider such as the PD10 provides adjustable pump pac-
ing. For rate and total display, as well as pump pacing,
the FT415/420 flow indicator can be mounted directly
on the TX80 Series, or remotely on a wall or panel.
The TB consists of a brass machined insert and a cast
bronze flow tube. The rotor, sensor, and all replaceable
parts are removable by pulling a simple u-clip lock.
Specifications
1.9 3.1 6.9
12
190 314 691 1200
Min.
Max.
1-1/2" 2" 3"
4"
General Information
LT-10617A
1 of 4
High level (12 VDC)
signal can be sent
up to 2000+ feet
without transmitter
Thread or sweat
copper connection
Rugged cast bronze body
One moving part,
easily removed
for service
Choice of output style:
Pulse only
Rate/Total
4-20 mA blind transmitter
Pulse Divider
Battery Rate/Total
●
●
●
●
●
Features
Sensor
GMR
12 VDC current
sinking pulse
Micro-power sensor
square wave
Materials
Sensor Body
Brass
Rotor
Kynar
Shaft
Ceramic
Bearings
Ruby ring, sapphire
endstone
Pipe Size
1-1/2"-4" (25-100mm)
FNPT
1-1/2"-4" (25-100mm)
Female coppersweat
Maximum Pressure
200 PSI (14 bar)
Maximum Temperature
200
°
F (93
°
C)
DIS
CON
TIN
UED