Alliance Laundry Systems Topload Washer - Manual (Page 2)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 201958 2
Washer Dimensions
Before You Start
Supplies
For most installations, the basic supplies you will need
are:
Parts Included
An accessories bag has been shipped inside your
washer. It includes:
• Two fill hoses with washers and filter screens.
Refer to step 3 of Installation.
• Four rubber feet. Refer to step 5 of Installation.
• Beaded strap. Refer to step 4 of Installation.
• Installation Instructions.
• User’s Guide.
• Warranty Bond.
NOTE: If the washer is delivered on a cold day
(below freezing), or is stored in an unheated room
or area during the cold months, do not attempt to
operate it until the washer has had a chance to
warm up.
NOTE: Install dryer before washer. This allows
room for attaching exhaust duct.
*With leveling legs turned into base. TLW2075N
Figure 1
28 in. (71.1 cm)
*53 i
n
. (134
.6 cm
)
.4 in.
(10.2 mm) 26 in. (66 cm) 25.6 in. (65 cm)
*29 i
n
. (73.
7 cm
)
*4
3
in
. (1
09.
2 cm)
*36
in.
(
91.
4 c
m
)
22.13 in. (56.2 cm)
*4
0.
25 in.
(
102.
2 cm)
TLW1978N
1 Safety Glasses
2 Wood Block
3 Wrench
4 Screwdriver
5 Pliers
6 Level
Figure 2
1
2
5
6
4
3