Seametrics S-Series - Manual (Page 2)

GENERAL INFORMATION, FEATURES, SPECIFICATIONS
FEATURES
Thread-in Sensor, Field Replaceable,
6-24 Vdc pulse
18’ Sensor Cable
Standard Acrylic Top (SPX)
Removable Lens Assembly
Hex Screws
Female NPT Ports
These versatile impeller flowmeters are available in 3/8", 1/2”,
3/4”, and 1" nominal pipe sizes with female NPT threads. They
employ jewel bearings to allow for very low minimum flow rates
and superior life.
With a body material of polypropylene, the SPX is an economical
choice for metering water or low corrosion fluids. The lens cover
is available in a choice of materials: acrylic for visual flow indica-
tion of low-corrosive fluids; polypropylene when more corrosion
resistance is needed. The standard rotor assembly is Kynar with
tungsten carbide shaft. The O-ring is EPDM.
The SPT offers greater chemical resistance with a Teflon body
and cover, Teflon-coated Viton O-ring, and standard Kynar/
ceramic rotor assembly.
The pulse output of these meters is compatible with many dif-
ferent types of controls, including a full range of Seametrics rate
displays and controls. The Seametrics FT420 provides flow rate
and total flow indication, with 4-20 mA ouput capability. The
FT415 is a battery-operated rate & total display. For metering
pump pacing or interfacing with lowspeed counters, the PD10
pulse divider is recommended. The AO55 may be used for blind
4-20mA transmission.
SPX
shown
(Internal)
Jewel bearings
Kynar/Carbide or Kynar/Ceramic Rotor Assembly
EPDM (SPX) or Teflon-coated Viton (SPT) O-ring
Page 2
3/8”, 1/2”, 3/4”, 1”, Female NPT thread
18 feet standard (Maximum cable run 2000 ft.)
TFE Teflon
PVDF (Kynar)
Zirconia ceramic
Teflon-coated Viton
Ruby ring and ball
TFE Teflon
180˚ F (82˚ C)
150 PSI (10 bar)
+1% of full scale
5-24 Vdc, 2 mA min
Current sinking pulse, 6-24 Vdc
3/8”, 1/2”, 3/4”, 1”, Female NPT thread
18 feet (6m) standard (Maximum cable run 2000 ft. (607m))
Polypropylene
PVDF (Kynar)
Nickel tungsten carbide
EPDM
Ruby ring and ball
Acrylic
160˚ F (70˚ C)
150 PSI (10 bar)
+1% of full scale
5-24 Vdc, 2 mA min
Current sinking pulse, 6-24 Vdc
Connection Ports
Sensor Cable
Materials Body
Rotor
Shaft
O-Ring
Bearings
Cover
Maximum Temperature
Maximum Pressure
Accuracy
Power
Outputs
SPX SPT SPECIFICATIONS*
*Specifications subject to change • Please consult our website for current data (www.seametrics.com).