Revo R4CH12VAMP User Manual
Features operating instruction, Connections, Specification
Please read this manual thoroughly before use, and keep it handy for future reference.
1. Video OUT
The RJ-11 DVR connector is used to connect a DVR to the Camera for recording
2. DC Power Signal Checker LED
The LED Illuminates "Green" when there is an input 12Vdc Power (From DVR)
The R4CH12VAMP Line Amplifier allows you to transmit video signals over 300ft distances by
amplifying the video signal from the camera to the DVR.
Please read the following instructions to correctly set up your line amplifier.
- Camera signal Checker LED
- Line DC Voltage Checker LED
- 300ft Video & Camera DC Power AMP
FEATURES
OPERATING INSTRUCTION
1. LED
A green indicator lights when the power is ON
2. DC JACK
Place the plug from the supplied table-top power supply into the DC 12V connector.
3. Video Signal Checker LED
The LED Illuminates "Green" when there is an input Video signal (From camera)
4. Camera INPUT
Four cameras can be connected to the AMP using the RJ-11 connections labeled CAM1, CAM2,
CAM3 and CAM4.
Front )
Rear )
The R4CH12VAMP is a 4-channel audio/video interface permitting connection from up to four modular
6-pin type (RJ-11) cameras directly to a 4-channel digital video recorder (DVR). The interface provides
breakout of the RJ-11 video, audio and power to separate connections.
CONNECTIONS
Supplied item
AMP
Power supply unit (DC 12V) / Power cord
Operating instructions manual
SPECIFICATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Video Mode
Power Requirement
Power Consumption
Input Signal
Video Amplifier (Gain Fixed AMP)
Impedance
Input Signal
Output Signal
User Controls
Maximum Wiring Distance
Ambient Temperature
Ambient Humidity
Weight
Dimensions
NTSC & PAL
AC110 ~ 230V, 50/60Hz±1Hz, Free Voltage
(110Vac 0.22A/ 230Vac 0.14A)
12V 0.9A max (4 Camera IR Active)
Composite Video Signal (from Camera)
Weak Signal 0.9Vp-p (used 300ft cable)
1 Vp-p
75 ohm
75 ohm
RJ-11 x 4
Video Sync (Green Light )
RJ-11 x 4
DC Voltage (Green Light)
CA1~4 Jack (LED x 4) / DC Power Jack (LED)
Video 1~4 Jack (LED x 4)
90m (300 ft.) for Multi Cable
95%
0.35 kg
166(W) × 30(H) × 92.2(D)mm
275(W) × 55(H) × 240(D)mm
-30℃ to + 70℃ (-22℉~158℉)
-10℃ to + 45℃ (14℉~113℉)
INPUT
OUTPUT
INPUT
OUTPUT
Connecter
Checker source
Connecter
Checker source
Front
Rear
Storage/Transport
Operating
Net
Packing
ITEM
No.
SPECIFICATION
Modular Cable
Modular Cable
Power
Adapter
AMP
R14CH12VA
VIDEO OUT 1~4
CAM1~4
DVR