Revo RM185-ID1 - Manual (Page 12)

▶
Plug & Play
The adoption of the new VESA Plug and Play solution eliminates complicated and time consuming
setup. It allows you to install your monitor in a Plug and Play compatible system without the usual
hassles and confusion. Your PC system can easily identify and configure itself for use with your display.
This monitor automatically tells the PC system its Extended Display Identification Data (EDID) using
Display Data Channel(DDC) protocols so the PC system can automatically configure itself to use the
flat panel display.
▶
Warm-Up Time
All LCD monitors need time to become thermally stable whenever you turn on the monitor after letting
the monitor be turned off for a couple of hours. Therefore, to achieve more accurate adjustments of
parameters, allow the LCD monitor to be warmed up for at least 30 minutes before making any screen
adjustments.
No. Input / Output Cable Type
1 DC Power DC Power Cord
2 Audio IN Audio Cable
3 VGA IN 15-pin VGA Signal Cable
● Input signal detail
10
! When the condition of the screen is not good, please press the "AUTO" button.
(This function may cause some temporary noise on the screen depending on VGA cards)
▶
Cable Connections