Precision Control Systems LineIR 5194 - Manual (Page 8)

106687-001 Rev. 2 3-1
Section 3 - SPECIFICATIONS
Specification 5194-02 5194-04 5194-05 5194-10 5194-16 5194-25 5194-38
Weight, Pounds (kg) 2.7 (1.2) 3.3 (1.4) 4.2 (1.9) 6.3 (2.8) 8.7 (3.9) 12.7 (5.7) 18.3 (8.3)
Lamp Type
QIH120-
1000RI2
QIH120-
2000RI2
QIH240-
1000R12 QIH240-
2000R12 QIH240-
3000R12 QIH600-
5000R12 QIH480-
3800R12
Lamp Part Number 106587-001 106587-002 103390-002 103390-004 103390-012 103390-008 103390-010
Lighted Length, Inches
(mm)
2.56 (65) 2.95 (75) 5.0 (127) 11.0 (279) 16.0 (406) 25.0 (635) 38.0 (965)
Watt Density (W/in) 390 678 200 182 187.5 142 100
Rated Voltage 120 120 240 240 240 480 480
Total Power Dissipated
@ Rated Voltage,
Watts
1000 2000 1000 2000 3000 3550 3800
Total Current @ Rated
Voltage, Amps
8.3 16.7 4.2 8.3 12.5 7.4 7.9
Cooling Water Flow 1 ,
GPM (lpm)
0.15 (0.5) 0.25 (0.9) 0.15 (0.5) 0.25 (0.9) 0.4 (1.5) 0.6 (2.2) 0.45 (1.7)
Cooling Air Flow,
SCFH
(M
3 /hr.)
30 (0.85) 2 30 (0.85) 2 30 (0.85) 3 40 (1.1) 3 50 (1.4) 3 60 (1.7) 3 50 (1.4) 3
1. Cooling water must be used on all Model 5194 heaters while in operation.
2. Cooling air must always be supplied to the Model 5194-02 & 5194-04 while the heater is operational.
3. Cooling air is required on this model if optional quartz window is installed. Cooling airflow is not required if
window is not installed on the heater.