Model 5420, Operation – Precision Control Systems 5420 User Manual
Page 9
Model 5420 ControlIR
TM
User Manual
Operation
Model 5420
Operation
The operation of the basic Model 5420 is simple once the heater has been
connected.
1.) Plug the unit in to the appropriate power source.
(120V, 240V, 480V)
2.) Turn the power switch on.
3.) Set the power level from 0 to 100% using the potentiometer
(black knob).
WARNING!
Infrared heaters can get extremely hot; do not leave them operating unattended.
Always turn the power switch off when shutting the unit down, do not rely on
setting the power to 0%.
Research, Inc.
6