NSi Industries DW200A User Manual

Page 7

This means unit is ready to accept 2nd holiday date.
Use same procedure to set more holidays.
To delete a holiday date press the DLETE key.
Press ENTER.

5.0 SCHEDULE SET MODE

Press MODE key till display shows

In the SCHEDULE mode, the following information
is set:
1. CHANNEL selection (CH1 and CH2)
2. TIME: HOUR and MIN.
3. EVENT: ON or OFF
4. DAY: DAY or DAYS combination.
5. HOLIDAY
Now you are ready to begin setting the schedules.
There are a total of 99 ON/OFF events.

5.1 CHANNEL SELECTION

Press SELCT key to toggle between channel 1
and channel 2. When desired channel flashes,
begin setting hours and minutes.

5.2 SETTING HOURS AND MINUTES

Press HOUR and MIN keys to desired setting.
Press ON/OFF key to desired setting.

5.3 SETTING DAYS AND HOLIDAY

MO (Monday) is flashing - If Monday is desired,
press SELCT key. If Monday is

not

desired, press

DAY key to pass Monday and advance to Tuesday.
a. Press SELCT key to select the flashing day, or

holiday.

b. Press DAY key to pass the flashing day and

advance to other days, or holiday

The same schedule will repeat on every holiday date.

SCH

CH 1

NOTE: SELCT key can also be used to

delete

a day,

or holiday

previously selected

when the aforemen-

tioned is flashing.

When you have desired time, event, and steady
days, press ENTER. This completes the first
schedule entry.

Now display shows that SCH 02 appears on the display.

This means unit is ready to accept 2nd schedule entry.

Use same procedure to set more SCHEDULES for
channel 1.

When you are finished setting schedules for chan-
nel 1, press SELCT key at the next blank sched-
ule screen and CH2 will flash. You can now begin
setting schedules for channel 2.

6.0 REVIEW, MODIFY AND DELETE

Use MODE key to advance to any of the following
MODES:
1. CLOCK MODE: Use HOUR, MIN, and DAY

keys to modify existing settings. Press ENTER.

2. DATE MODE: Use MONTH, DATE, and YEAR

keys to modify existing settings. Press ENTER.

3. DST

Daylight Saving is automatic. You do

not have to enter start and stop dates. Unit cal-
culates 1st Sunday of April and last Sunday of
October. You do not have to remember to
change every year. To eliminate, press
ON/OFF key to OFF. Press ENTER.

4. HOLIDAY MODE: Holiday dates can be

changed or deleted. Press MONTH and DATE
keys or DLETE key. Press ENTER.

5. SCHEDULE MODE: Schedule review, modify,

delete. You can modify the schedule entry using
HOUR, MIN, ON/OFF key and SELCT key. Press
ENTER after each modification.

CH 1