NSi Industries DGS180 Old Series - Manual (Page 7)

5. When all selected skip days are displayed as con-
stant. Press ENTER key. Unit goes to run mode
and clock shows real time. Skip day(s) will flash
when its day of the week is reached.
6. To skip schedules on all days (such as for vaca-
tion shut-down) press the SP DAY key when unit
is in the run mode. Current day of the week will
flash and a “D” will appear in the upper right dis-
play. To resume normal schedule, press SP DAY
key again.
REVIEW/MODIFY
SCHEDULE:
1. Press MODE key until display shows SET. The
first chronological event will be displayed.
2. Press ENTER repeatedly to continue reviewing
the other scheduled events. After all are dis-
played, unit will show 12:00 AM and new entries
may be made.
3. To modify an event, press mode key until display
shows SET. Then press ENTER key until the
scheduled event is displayed. Then press the
SlG/SEC key to change to SIG 1, SIG 2, or blank
which indicates delete entirely. PRESS ENTER
KEY AFTER EACH MODIFICATION.
SKIP DAYS:
Press Mode key until display shows SP. All of the
skip days are displayed as solid. To modify, use
DAY/MONTH and SP DAY keys. (See section “TO
SET SKIP DAYS”).
OVERRIDE:
Override can only be executed when unit is in the run
mode and is accomplished by pressing the OVER-
RIDE key.
When pressed, duration time of signal 1 will be exe-
cuted. If no specific duration had been set for signal
1, then it will sound for 1 second.
If either signal 1 or signal 2 are in progress when
OVERRIDE key is pressed, then the signal will be
terminated.
7
MLI-91(A)
TORK ®
1 GROVE STREET, MT. VERNON, NY 10550 TEL: 914-664-3542
FAX: 914-664-5052